Machine Design

The gears are classified as follows: 1: The gears which connect parallel shafts such as spur, Helical and double helical gears. 2: The ...

The following four systems of gear teeth are used to manufacture gears. 1: 14 1/2 degree composite system. 2: 14 1/2 degree full depth...

GEAR  MATERIAL The selection of material used to manufacture the gears depends upon the conditions like strength, noise and resistance to w...

INTRODUCTION When it is required to transmit power from one shaft to another parallel to each other at long distance, we use wire rope or...

PITCH OF SPRING The pitch of the spring is the axial distance between adjacent turns in uncompressed state. SPRING INDEX It is the r...